Explore all sen6 spec data
Connectivity and memory
NB IoT independent connection
WiFi connectivity for data streaming and OTA firmware updates
Double processor architecture (System + ML dedicated CPU)
Micro SD slot store and forward data
Inertial sensors
tech data Range [g] ±2 | ±4 | ±8 | ±16
sen6 tech Sensitivity [mg/LSB] 0,061 | 0,122 | 0,244 | 0,488
sen6 tech Range [g] ±250 | ±500 | ±1000 | ±2000
sen6 tech Sensitivity [mg/LSB] 8,75 | 17,50 | 35 | 70
High-performance triaxial magnetometer: ±50 gauss
Gps
The device acquires location information through positioning systems:
BeiDou, EGDE, Galileo, GLONASS, GPS, GNSS
Enviroment sensor
4 on-board temperature sensors: surface, exterior, interior of the device. Fourth external sensor can be added.
Three of the three temperature probes are available as connectors, so they can also be remote outside the device
With a range between 300 hPa and 1200 hPa and accuracy ±0,25%
Accuracy ±3% relative humidity
With a range between 60 Hz a 20 kHz – 24 bit
Volatile organic compounds are divided into three categories, depending on the sources of origin:
anthropogenic compounds, originating mainly from human activities, such as petroleum-derived solvents and combustion products; They include benzene, toluene, methane, carbon tetrachloride, ethane, etc. In particular, the industrial use of fossil fuels produces VOCs, either directly from products (e.g. petrol), or indirectly as by-products (e.g. motor vehicle exhaust gases).
biogenic compounds of predominantly natural origin, such as terpenes (α-pinene, β-pinene, limonene, sabinene, etc.), which are contained in plant essential oils;
anthropogenic and biogenic compounds, such as isoprene (widely synthesized industrially for the production of plastics and synthetic rubbers)
I/O
RS 485 interface - Modbus
4 – 20 mA.
0 – 10 V.
Electrical and environment characteristics
Direct 12÷24 Vdc
USB Type C 5 Vdc
Internal backup battery
Certified internal battery
-10°C to +55°C